新型三硅氧烷表面活性剂在低能固体表面的铺展性能研究  

Studies on the Spreading Performance of A Novel Trisiloxane Surfactant Aqueous Solution over Low-energy Solids

作　　者：彭忠利[1] 李小容[1] 莫震天 龚达浩 

机构地区：[1]惠州学院化学工程系,广东惠州516007

出　　处：《广东化工》2014年第17期34-35,37,共3页Guangdong Chemical Industry

基　　金：惠州市科技计划项目(2013W13);2013年广东省大学生创新实验项目(1057713020)资助

摘　　要：以测试表面活性剂溶液在固体表面铺展能力的方法,研究了温度、湿度和外加电解质浓度对新型双尾三硅氧烷表面活性剂1 L溶液在石蜡等低能固体表面的铺展性能的影响,结果表明:测试铺展性能也能大致求出表面活性剂1L的临界润湿浓度(CWC);1L溶液的铺展能力是随着温度和湿度的升高而增强的;较低的外加电解质浓度有助于提高1L溶液的铺展性能。实验说明,表面活性剂1L作为润湿剂或铺展剂使用时可以选择在较高的温度和(或)湿度下使用,以及(或者)通过添加适量的电解质的方法来提升其铺展能力,而且使用的浓度应该要在其CWC以上。By testing the spreading ability （SA） of surfactant aqueous solution over solid substrate, the influences of temperature, relative humidity, the concentration of added electrolyte on the spreading performance of novel double-tail trisiloxane surfactant 1 L solution over low-energy solid substrates （such as Paraffin wax） were investigated. The results showed that the critical aggregation concentration （CAC） of surfactant 1 L could also be obtained roughly by measuring its SA, and that the SA of 1 L solution was improved with the increase of temperature, relative humidity and a lower concentration of added electrolyte. It is suggested that when surfactant 1 L is used as a wetting agent or a spreading agent, the SA of its solution can be improved by using it at a higher temperature and （or） a higher relative humidity, and （or） by adding appropriate amount of electrolyte; more over, its concentration must be over its CWC.

关 键 词：双尾三硅氧烷表面活性剂 铺展性 低能固体表面 影响因素 

分 类 号：S3[农业科学—农艺学] O647.5[理学—物理化学]