滚子凸度偏移和外滚道锥度对圆柱滚子轴承接触应力的影响  

Effect of Roller Convexity Offset and Outer Raceway Taper on Contact Stress of Cylindrical Roller Bearing

作　　者：祝世超 扈文庄[2] 夏新涛[3] 李军 姜宗成 

机构地区：[1]南方轴承股份有限公司,江苏常州213000 [2]洛阳轴研科技股份有限公司,河南洛阳471039 [3]河南科技大学机电工程学院,河南洛阳471003

出　　处：《轴承》2014年第10期1-4,共4页Bearing

基　　金：国家自然科学基金项目(51075123)

摘　　要：以N1015圆柱滚子轴承为研究对象,采用ANSYS对滚子凸度偏移、外滚道锥度对滚子与外滚道间接触应力的影响进行了分析,得出了二者与接触应力的关系。结果表明,为使轴承在给定载荷下的接触应力均匀分布,外滚道锥度和滚子凸度偏移应控制在合适的范围内,否则,滚子与滚道间的接触应力会迅速增大,其分布也会呈现出复杂的非对称性与非均匀性。Taking the cylindrical roller bearing N1015 as a research object,the influence of roller convexity offset and outer raceway taper on contact stress between roller and outer raceway is analyzed by using ANSYS.The relationship between roller convexity offset and outer raceway taper and contact stress is obtained.The results show that in order to make contact stress of bearing distributing uniformly under the given load,the roller convexity offset and the outer raceway taper should be controlled in a suitable range.Otherwise the contact stress between roller and raceway increases observably and its distribution presents complex asymmetry and nonuniformity.

关 键 词：圆柱滚子轴承 接触应力 滚子凸度偏移 滚道锥度 

分 类 号：TH133.332[机械工程—机械制造及自动化] O241.82[理学—计算数学]