检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李星红[1,2] 刘敏[3] 蒲春生[3,4] 郑黎明 王成俊[5]
机构地区:[1]中国石油大学(北京)石油工程学院,北京102249 [2]陕西延长石油(集团)有限责任公司,陕西延安716000 [3]中国石油大学(华东)石油工程学院,山东青岛266580 [4]重质油国家重点实验室,山东青岛266580 [5]陕西延长石油(集团)有限责任公司研究院,陕西西安710000
出 处:《油气地质与采收率》2014年第3期86-88,91,共4页Petroleum Geology and Recovery Efficiency
基 金:国家自然科学基金"低渗油藏低频振动辅助表面活性剂复合驱油机理研究"(51274229)
摘 要:低频振动采油和聚合物凝胶调驱分别作为一种物理和化学提高采收率技术,已被广泛应用于油田增产,如何将这2种技术有机地结合起来,建立低频振动—聚合物凝胶化学复合调驱技术,提高整体调驱效果,成为一个重要的研究方向。通过室内实验评价,研究了低频振动对聚合物凝胶交联性能的影响规律,以避免2种采油技术复合应用时综合调驱效果变差;室内实验采用粘度法评价不同振动参数对聚合物凝胶交联过程的影响规律。实验结果表明,在振动加速度为0.05-0.08倍重力加速度时,低频振动可以促进聚合物凝胶交联成胶;在振动加速度为0.08-0.19倍重力加速度时,低频振动抑制聚合物凝胶交联成胶;当振动频率为12-30 Hz时,振动抑制聚合物凝胶交联成胶。因此,当现场复合应用低频振动采油技术与聚合物凝胶调驱技术时,应注意选择合适的振动频率和振动加速度。Low-frequency resonant wave-based oil recovery and polymer gel technology have been widely used in production stimula-tion. To avoid the possible disturbance between the two technologies when combining the two technologies in application, the analysisof the effect of low-frequency vibration on the gel properties is conducted. Based on the viscosity method, the experiment is conductedto evaluate the vibration parameters in the influence on the crosslink of gel. The results show that the low-frequency resonant wave canimprove the crosslink with the acceleration from 0.05 G to 0.08 G while it will lead to inhibition in the range of 0.08 G to 0.19 G, andthe frequency between 12 Hz and 30 Hz will damage the gelation. Therefore, when combining the two techniques in the oilfield, the fre-quencyand acceleration ofvibration should be cautiously chosen in order to avoidthereductionof performance.
分 类 号:TE357.431[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.14.12.254