基于温度场均匀化分析的还原炉底盘结构研究  

Analysis of Reduction Furnace Chassis Structure Based on the Homogenization of Temperature Field

作　　者：王晓静[1] 张芳[1] 张灿[1] 

机构地区：[1]天津大学化工学院,天津300072

出　　处：《化学工业与工程》2014年第6期59-64,共6页Chemical Industry and Engineering

基　　金：天津市自然科学基金资助项目(13JCZDJC27200)

摘　　要：主要研究多晶硅还原炉的底盘结构,通过改进底盘冷却液流道形式,以提高在该底盘结构形式下温度场分布的均匀性及底盘结构的安全性。本文研究的底盘结构采用了限制射流直喷喇叭口式冷却流道,在底盘上滑板下表面不易形成气膜隔层,大大降低了底盘滑板的温差应力,提高了底盘结构的安全性。结合大型多晶硅还原炉的研制要求,应用Fluent对多晶硅还原炉底盘的辐射、导热和对流的传热过程进行了传热分析,得出了底盘内部温度场的分布云图,并在此基础上通过ANSYS对多晶硅还原炉底盘进行了热-结构耦合分析,得到了满足强度、刚度条件下结构的最优化。This paper mainly discusses the development of polycrystalline silicon reduction furnace chassis structure. In order to enhance the uniformity of chassis internal temperature field and the security of chassis structure,we improve the type of chassis internal coolant＇s flow channel by introducing a new type of flow channel,which is applied for coolant distribution and limiting jet to format directly injection flow pattern. The new structure makes it more difficult to form a gas membrane compartment under the surface of chassis＇ skateboard. This greatly reduces the thermal stress of the chassis skateboard and improves the security of the chassis structure. Combined with the RD demand of a large-scale polycrystalline silicon reduction furnace,the thermal analysis involved radiation,heat conduction and convection were conducted with software Fluid,using computational fluid dynamics（ CFD）,and the contours of the chassis internal temperature field were given. The results of the simulation could be used as the temperature boundary condition in the thermal-structure coupling analysis,which could help obtain the optimal solution of structure meeting the requirement of strength and stiffness.

关 键 词：多晶硅还原炉 底盘 温度场 应力分析 

分 类 号：TK175[动力工程及工程热物理—热能工程]