基于人体仿真技术的家具电子开料作业疲劳研究  

The Fatigue Research of the Furniture CNC Saws Operation Based on Human Body Simulation Technology

作　　者：刘永溪 于娜[1] 申黎明[1] 费凡[1] 

机构地区：[1]南京林业大学家具与工业设计学院,南京210037

出　　处：《家具》2014年第6期6-10,共5页Furniture

基　　金：江苏省高校自然基金项目(164104825);江苏高校优势学科建设工程资助项目(PADD);国家级大学生创新创业训练计划项目(164104914)

摘　　要：运用人体仿真技术,对家具电子开料作业中的人体疲劳进行研究。研究结果表明：蹲姿作业时,推荐腰椎舒适作业角度范围为60°~70°;立姿弯腰作业时,推荐弯腰作业脊柱弯曲角度应大于60°。板料放置高度控制在900 mm以上更有利于保护作业者腰椎的健康安全。The human simulation technology was used to study the human body’s fatigue in the furniture CNC saws operation.The research results show that：when the operator is in a squatting position,the comfortable operation angle of lumbar is recommended ranging from 60 ° to 70 °.When the operator is bowing in a standing position,the comfortable operation angle of lumbar is recommended above 60 °.Sheets placed above 900 mm in height is more conducive to the protection of the health and safety of operators’ lumbar spine.

关 键 词：电子开料 人体仿真 作业疲劳 

分 类 号：TS664.4[轻工技术与工程]