基于SolidWorks的残膜清理滚筒的运动仿真  

Motion Simulating on Arc Reciprocating Tooth Roller for Collecting Plastic Residue Based on the Software of Solidworks

作　　者：刘旋峰[1] 郭兆峰[1] 牛长河[1] 蒋永新[1] 刘小龙[1] 王学农[1] 

机构地区：[1]新疆农业科学院农业机械化研究所,乌鲁木齐830091

出　　处：《农机化研究》2015年第6期74-76,共3页Journal of Agricultural Mechanization Research

基　　金：新疆维吾尔自治区科技成果转化专项资金项目(201354101)

摘　　要：弧线往复式挑膜滚筒(后文简称"滚筒")是耕前残膜回收机械的典型机构。提出了一种基于SolidWorks及其Motion插件的滚筒运动仿真方法,对残膜回收机具的结构设计起到了指导作用。应用SolidWorks三维设计软件创建滚筒三维模型,运用软件集成的Motion插件对作业机具前进速度、滚筒的转速、挑膜齿尖空间运动曲线进行运动仿真,得出残膜回收机的相关工作参数。通过分析,讨论在同等深度和相同前进速度的前提下滚筒转速与残膜捡拾率的关系。运用SolidWorks滚筒的三维建模及运动仿真,验证滚筒结构设计的合理性,为SolidWorks及Motion插件在残膜回收机具设计中的应用提供参考。Arc reciprocating tooth roller for collecting plastic residue is a typical machine for collecting plastic residue before furrowing. A method of motion simulating on the roller based on the software of solidworks and plug-in motion is introduced, for structure designing of collecting plastic residue. Roller for collecting plastic residue is designed and assembled by using the 3 D design software of Solidworks. Forward speed, rotate speed and space curvilinear motion is simulate on the software of motion, motion. Operating parameter with the machine frame of collecting plastic residue are found. Discuss the relations of the roller rotate speed and rate on collecting plastic residue by the same depth and forward speed. Verify rationality of structure designing on the roller by using three-dimension modeling and motion simulating with solidworks. Provide reference for the solidworks and plug-in motion in the designing machine of collecting plastic residue.

关 键 词：残膜回收 弧线往复式挑膜滚筒 SOLIDWORKS 运动仿真 

分 类 号：S223.5[农业科学—农业机械化工程]