基于ERA法的齿轮箱试验模态分析  

Modal Analysis of Gearbox based on the Method of ERA

作　　者：张琳[1] 马维金[1] 黄彬城[1] 葛玉珉 温芳[1] 

机构地区：[1]中北大学机械工程与动力学院,山西太原030051 [2]中国重汽集团大同齿轮有限公司,山西大同037006

出　　处：《机械传动》2015年第1期118-121,125,共5页Journal of Mechanical Transmission

基　　金：2013年山西省自然科学基金(项目编号:2013011025-1);2013高等学校博士学科点专项科研基金(项目编号:20131420120002)

摘　　要：搭建了基于ERA法的试验模态分析系统,在Coinv DASP MAS模态分析模块下对HW25505TCL型号齿轮箱进行了建模,采用单点激励多点响应法,对该齿轮箱进行锤击试验,对所采集数据进行分析处理,建立状态空间方程,通过ERA模态参数识别方法来提取模态参数进行定阶、拟合,获得了该齿轮箱的各阶模态参数,并采用振型相关矩阵进行模态验证。通过与计算模态比较,证明两者的有效性和可靠性,为进一步改进齿轮箱的结构特性以及基于模态分析的齿轮箱故障诊断等提供了理论依据。Based on the method of ERA, a system of modal analysis is built, the model of HW25505TCL gearbox is set up under the Coinv DASP MAS modal analysis module. The relating modal datum are obtained by hammering test of single--input multi-- output analysis method, then the state--space equation is established after the analysis of modal datum. The various modal parameters of the gearbox are obtained by order selection and fitting of the datum which extracted through the method of ERA modal parameter identification, and by using modal correlation matrix, the modal test and veri fication are carried out. Through the comparison with calculating modal, the validity and reliability are proved. The theoretical basis for the improvement of the gear box structure characteristics and the fault diagnosis of gearbox is provided.

关 键 词：齿轮箱 ERA 模态分析 振型相关矩阵 模态验证 

分 类 号：TH132.41[机械工程—机械制造及自动化]