搅拌摩擦焊焊缝激光检测与焊接轨迹自动修正  

Laser detection weld and automatic correction of welding trace in friction stir welding procedure

作　　者：周法权[1,2] 刘文涛[1] 林永勇 韦叶 张华德 

机构地区：[1]哈尔滨工业大学机电工程学院,黑龙江哈尔滨150001 [2]上海航天设备制造总厂,上海200245

出　　处：《焊接技术》2014年第12期55-58,6,共4页Welding Technology

基　　金：国防科工局军用技术推广专项<并联回抽式搅拌摩擦焊装备研制>;上海市科学与技术委员会资助项目(13DZ1110400)

摘　　要：针对大型薄壁构件搅拌摩擦焊过程中,焊缝实际位置与程序轨迹容易出现偏差的情况,采用点扫描激光法对焊缝位置进行检测,通过开放式数控系统对数据进行实时分析与处理,得出实际焊缝分布状态,从而实现对焊接轨迹的自动修正。试验结果表明,该方法可以有效纠正焊接轨迹,提高大型薄壁构件搅拌摩擦焊的焊接质量。For the friction stir welding process of component with large size and small thickness, the deviation between actual weld and program welding trace may easily occur. To avoid that deviation, a point laser scanning method was adopted to detect the weld, by an Open Architecture NC system for real-time analysis and processing of data, the actual weld position was obtained and the program weld trace could be corrected. Experimental results show that this method could effectively correct the welding path, increased the welding quality of large and thin component of friction stir welding.

关 键 词：搅拌摩擦焊 激光扫描 焊缝检测 焊接轨迹修正 

分 类 号：TG441[金属学及工艺—焊接]