双螺杆泵螺杆端面截形设计与研究  

Designing and studying of profile of transverse of twin-screw pump's screw

作　　者：刘天航[1] 董黎敏 王建[1] 史津平[1] 郭津津[1] 

机构地区：[1]天津理工大学机械工程学院复杂系统控制理论及应用重点实验室,天津300384

出　　处：《天津理工大学学报》2014年第6期16-19,38,共5页Journal of Tianjin University of Technology

基　　金：天津市大学生创新性计划项目(X2013003);天津市科技计划项目(11ZCKFGX03700)

摘　　要：提出了基于离散点的双螺杆泵螺杆端面截形的计算方法,建立了已知铣刀廓形离散点数据计算由其加工的螺杆端面截形的数学模型.采用三次参数样条法计算铣刀廓形离散点的倾斜角,利用Matlab软件对截形设计过程中遇到的非线性方程进行求解.分别以完整的铣刀廓形和缺损的铣刀廓形为例,进行计算说明,求解相应的双螺杆泵螺杆端面截形.A new method of calculation on discrete points of transverse profile of twin-screw pump＇s screw is presented. The mathematical mode of transverse profile of workpiece is established when the discrete points of cutter profile are given. Calcu- late slope angle of each discrete point of milling cutter by adopting cubic parametric spline mtehod. Solve nonlinear equation by Matlab software in the process of designing transverse profile. Taking example of complete and defective profile of milling cutter, carry out calculating in order to solve corresponding profile of transverse of twin-screw pump＇s screw.

关 键 词：螺杆 端面截形 成型铣刀廓形 三次参数样条法 离散点 

分 类 号：TH327[机械工程—机械制造及自动化]