接触式螺纹测量仪的六自由度位姿误差的测量与补偿  

Measurement and Compensation of Pose Errors of Contact Measuring Instrument of Screw Thread Parameter

作　　者：朱贺贺 赵东标[1] 沈建清 贡国云 

机构地区：[1]南京航空航天大学,江苏南京210016 [2]南京紫金计量有限公司,江苏南京210028

出　　处：《机械与电子》2015年第3期58-62,共5页Machinery & Electronics

摘　　要：为了提高接触式螺纹测量仪的测量精度,通过深入的误差分析,提出了针对高精度接触式螺纹测量仪的六自由度位姿误差的一种新的误差测量和补偿的方法。设计了一套适用于螺纹测量仪的标准规,用于综合测量探针相对于螺纹专用夹具的六自由度位姿误差。利用参数已知的精密标准规代替参数未知的被测螺纹进行扫描测量,建立螺纹测量仪的误差综合测量方程组,并代入受六自由度位姿误差影响的扫描数据,解方程组反求出探针运动空间的六自由度位姿误差,然后,在不更换探针和专用夹具的情况下,对被测螺纹进行扫描测量,建立螺纹测量仪的误差补偿方程组,并将综合误差测量所得的相关误差参数带入方程组,求解出被测螺纹的理想轮廓信息,完成高精度接触式螺纹测量仪的综合误差补偿。In order to improve the measuring accu-racy of contact measuring instrument of screw thread parameter,a new method of measurement and com-pensation of pose errors is presented in this paper after error analysis.A new type of master gauge has been designed in this paper for measuring the six degrees of freedom comprehensive pose error between the meas-urement probe and the special fixture.At first,the master gauge whose parameters are known is measured by this instrument.The equations describing the rela-tion between the parameters and the collected data of the mater gauge are built.The collected data which is affected by the pose errors is plugged into the equa-tions.The pose errors can be obtained by solving the equations.Then,the screw thread is measured by this instrument without replacing the probe or the fixture. The pose errors obtained by errors measurement is plugged into the error compensation equation which is built in this paper.The wanted thread axis profile sec-tion obtained by solving the equations can be used to calculate the precise parameters of screw thread.

关 键 词：接触式螺纹测量仪 误差测量 误差补偿 

分 类 号：TP273[自动化与计算机技术—检测技术与自动化装置]