柔印网纹辊油墨转移特性研究  

Ink Transfer Characteristics in the Flexographic Printing Process

作　　者：陈家祥 唐正宁 王莎莎 缪斌鹰 

机构地区：[1]江南大学,无锡214122

出　　处：《包装工程》2015年第7期134-137,144,共5页Packaging Engineering

摘　　要：目的研究网纹辊向印版进行油墨转移的特性。方法将网纹辊结构简化为轴对称的梯形槽,使用有限元法对网纹辊油墨转移过程进行数值模拟,即模拟油墨从网纹辊向印版进行转移,并且加入网纹辊和印版滚筒的运动情况,研究了接触角、梯形槽高宽比和角速度对油墨转移的影响。结果分析了油墨从网纹辊转移到印版的影响因素,油墨转移率随着上板接触角的增加而减小,随着梯形槽接触角的增大而增大,梯形槽高宽比越小和角速度越大,油墨转移率越高。结论通过对柔印网纹辊油墨转移情况进行数值模拟,得到了接触角、梯形槽高宽比及角速度对油墨转移情况的影响规律,为柔印生产实践提供了理论参考。The aim of this work was to study the transfer properties of ink between the anilox roller and the plate during printing. The structure of the anilox roller was simplified into an axisymmetric trapezoidal groove, and the ink transfer process was numerically simulated using the finite element method, to simulate the ink transfer from the anilox roller to the plate. The influences of the contact angle, trapezoidal groove aspect ratio and the angular velocity on the ink transfer were studied considering the movement of the anilox roller and the plate cylinder. The influencing factors on ink transfer from the anilox roller to the plate were analyzed, and it was found that the ink transfer ratio decreased with the increasing upper plate contact angle and increased with the increasing dovetail groove contact angle; while the smaller the aspect ratio and the larger the angular velocity, the higher the ink transfer rate. The influencing rules of the contact angle, the aspect ratio and the angular velocity on the ink transfer were obtained by numerical simulation of the ink transfer in the flexographic printing process, which provided theoretical reference for the flexographic printing production.

关 键 词：柔印 网纹辊 有限元 油墨转移 

分 类 号：TS802.3[轻工技术与工程]