三辊导向装置连杆机构的仿真优化设计  

Optimal Design of the Linkage Mechanism Simulation of Three-Roller Guiding Device

作　　者：张轶蔚[1] 严伟[1] 汤立刚[1] 

机构地区：[1]湖北理工学院,湖北黄石435003

出　　处：《机械传动》2015年第4期70-76,共7页Journal of Mechanical Transmission

基　　金：湖北省教育厅科学技术研究项目(B2014036)

摘　　要：为进一步完善三辊导向装置连杆机构的设计方法,在综合考虑设备的工艺要求、使用条件以及机构的传动性能的基础上,建立了多目标函数优化设计的数学模型。采用虚拟样机技术,利用ADAMS对完全参数化的机构模型进行了仿真优化以确定具有最优性能的设计参数。仿真结果表明,在给定的约束条件下,机构的综合工作性能得到显著改善。In order to improve the method to design the linkage mechanism of three-roller guiding device installed at the exit of piercing mill,the mathematical model of the multi objective optimal design is established based on comprehensive consideration of the technical requirement,the operation condition and the transmission performance of the mechanism.The fully parameterized virtual prototyping model of mechanism is optimized by simulation to determine the design parameter in the ADAMS environment.Under the given constraints,the simulation results show that the comprehensive performance of the mechanism is significantly improved.

关 键 词：三辊导向装置 连杆机构 虚拟样机 ADAMS 优化设计 

分 类 号：TH112[机械工程—机械设计及理论]