基于ABAQUS的压面机压辊有限元分析  

Finite Element Analyses of Pressurizing Roller of Noodle Making Machine based on ABAQUS

作　　者：代治国 张涛[2] 刘开生 雷昌浩 陈崇 谢冬 

机构地区：[1]重庆市经贸中等专业学校,重庆402160 [2]甘肃农业大学工学院,兰州730070 [3]敦煌市七里镇人民政府农林牧服务中心,甘肃敦煌736200

出　　处：《湖北农业科学》2015年第5期1208-1212,共5页Hubei Agricultural Sciences

基　　金：国家中等职业教育改革发展示范学校建设计划项目(CQ201208);干旱环境作物学重点实验室开发基金项目(GSCS-201209);"十二五"国家科技支撑计划项目"西北绿洲农牧循环技术集成与示范"(2012BAD14B10)

摘　　要：研究压面机压辊和面团的受力,从结构和功能上对压辊进行改善与优化。利用CAD和Solid Works建立压面机整体平面图和三维图,并借助ABAQUS软件对压面机的执行部件压辊进行仿真分析。结果表明,压辊转速50 r/min、直径140 mm时,压面过程中与面团接触最多,面团的受力区域最大,更易排除面团中的空气,得到致密的面筋组织,面筋更筋道。The stress of the pressurizing roller of the noodle making machine and the dough were studied to improve and optimize the pressurizing roller from the structure and function. Using the CAD and Solid Works, the plan and 3D map of the noodle making machine were built, which can intuitively optimize the structure and simulate the pressurizing roller by ABAQUS. The results showed that optimal parameters of the pressurizing roller were the speed of 50 r/min, the diameter of 140 mm. Under these conditions, the pressurizing roller and the dough contacted largely. The air in the dough was removed easily. The dense gluten and chewiness was obtained.

关 键 词：压面机 虚拟样机 SolidWorks三维建模 ABAQUS仿真分析 

分 类 号：TS211.3[轻工技术与工程—粮食、油脂及植物蛋白工程]