瓷修复体界面仿生功能梯度层的构建及力学性能分析  

Mechanical analysis and fabrication of the bioinspired functionally graded interface layer of all-ceramic restoration

作　　者：程蕙娟[1] 崔畅[1] 苏庭舒[1] 孙健[1] 

机构地区：[1]上海交通大学医学院附属第九人民医院.口腔医学院口腔修复科上海市口腔医学重点实验室上海市口腔医学研究所,上海200011

出　　处：《口腔材料器械杂志》2015年第2期69-73,共5页Chinese Journal of Dental Materials and Devices

基　　金：上海市教育委员会科研创新重点项目(12ZZ116);上海市重点(特色)学科建设项目(T0202)

摘　　要：目的：体外研究玻璃渗透技术形成的氧化锆梯度陶瓷在不同预烧结温度下试件弹性模量与抗压强度的变化。方法将功能梯度氧化锆试件按照预烧结温度分为900℃、1000℃、1100℃3组，电镜下观察梯度层的微观结构，并对试件作纳米压痕试验和最大断裂压力测试，检测氧化锆试件的弹性模量与抗压强度。结果电镜显示氧化锆试件表面形成了约150~200μm的梯度结构层，氧化锆功能梯度层内弹性模量逐渐增高。预烧结温度1000℃时试件抗压强度最高，与其他组有显著性差异（P〈0.05）。结论利用玻璃渗透技术可以在氧化锆核瓷内形成弹性模量梯度结构，预烧结温度1000℃时对试件的增韧效果显著。ObjectiveTo research the change of elastic modulus and compressive strength of glass infiltrated zirconia ceramic at different presintering temperature.MethodsThe functionally graded zirconi a specimens were divided into three groups according to the presintering temperature 900℃, 1000℃ and 1100℃. Then the microstructure of the gradient layer structure of the zirconia specimens was observed. And the nano-indentation method and maximum fracture stress test were used to determine the elastic modulus and the compressive strength of zirconia specimens.ResultsThere was about 150-200μm functionally graded layer formed on the surface of zirconia specimens by the electron microscopy. In the functionally graded layer, the elastic modulus was increased gradually. When the presintering temperature was 1000℃, the compressive strength is the highest, and there was significantly difference compared to other groups （P〈0.05）.ConclusionsThe glass infiltration technology can form elastic modulus gradient structure on the surface of the zirconia core porcelain. The toughening effect on the zirconia ceramic specimen was improved by lower presintering temperature.

关 键 词：全瓷 仿生功能梯度 预烧结 弹性模量 抗压强度 

分 类 号：R783[医药卫生—口腔医学]