提高出租车轮胎耐磨性能的研究  

Improvement on Wear Performance of Taxi Tire

作　　者：林丽玉[1] 王志远[1] 白雅[1] 罗吉良[1] 

机构地区：[1]广州市华南橡胶轮胎有限公司,广东广州511400

出　　处：《轮胎工业》2015年第4期214-216,共3页Tire Industry

摘　　要：介绍提高出租车轮胎耐磨性能的试验研究。结果表明,提高胎面花纹饱和度,带束层采用2+2×0.3HT钢丝帘线,胎体采用1层1670dtex/2聚酯帘布,合理调整胎圈三角胶高度,增大胎面胶配方中顺丁橡胶用量,可以在保证轮胎抓着力和抗撕裂性能的同时获得良好的耐磨性能。In this work, improvement on the wear performance of taxi tire was experimentally studied. The results showed that, by increasing the block/total ratio of pattern, using 2 ＋ 2 × 0.3 HT steel cord for belt ply and 1 layer of 1670dtex/2 polyester cord for carcass ply,adjusting the height of bead filler,and increasing the amount of BR in the tread compound formula,the abrasion resistance of the tire was improved while the grip property and tear resistance were good.

关 键 词：出租车轮胎 耐磨性能 胎面花纹 结构设计 配方设计 

分 类 号：U463.341[机械工程—车辆工程]