三螺旋人工腱索结构的力学性能仿真验证  

Simulation on Mechanical Properties of Triple- helix Artificial Chordae Structure

作　　者：常丽南[1] 宋成利[1] 沈桐[1] 梅举[2] 戴黄栋[2] 

机构地区：[1]上海理工大学医疗器械与食品学院教育部微创医疗器械工程研究中心,上海200093 [2]上海交通大学医学院附属新华医院心胸外科,上海200092

出　　处：《生物医学工程研究》2015年第2期89-93,共5页Journal Of Biomedical Engineering Research

基　　金：上海市科委产学研项目(11DZ1921600);上海理工大学微创励志创新基金资助项目(JWCXSL1402)

摘　　要：基于真实心脏二尖瓣腱索结构,利用仿生学类比方法提出整体三螺旋人工腱索等效替代模型,应用ABAQUS对其进行模拟拉伸测试,并与真实拉伸试验下猪心二尖瓣腱索(边缘腱索、基底腱索与支撑腱索)的力学性能进行对比分析,从而验证此等效模型的可行性与有效性。结果表明:三螺旋人工腱索结构所能承受的最大应力与实际试验中的平均最大应力一致,且相应腱索种类的拉力位移曲线与试验曲线基本相符。本研究提出的三螺旋人工腱索结构接近于真实腱索特性,可缓解二尖瓣膜上应力集中现象,为人工腱索材料的结构改进指明了新方向,同时,仿真过程对有限元模拟生物软组织拉伸性能模块提供了参考价值。Bionic equivalent triple -helix artificial chordae structure was estabilished based on the structure of real heart mitral valve chordae.ABAQUS was applied to simulate the tensile tests.Simulation results were analyzed and compared with real chordae （marginal、basal and strut chordae）tensile properties to vertify feasibility and correctness of model.Results showed that the maximum stress of spiral chordae was consistent with the actual average maximum stress.Besides,force displacement curves of all kinds of chor-dae were basically in accordance with test curves.This proposed triple -helix equivalent model is closer to the real chordae’s proper-ties and can reduce stress concentration on mitral leaflets,which indicating a new direction to the structure improvements of artificial chordae materials and providing reference for finite element researches on soft tissue tensile properties module.

关 键 词：三螺旋结构 人工腱索 ABAQUS有限元分析 心脏腱索拉伸试验 

分 类 号：R318[医药卫生—生物医学工程]