机械剥离石墨烯修饰电极检测食品接触材料中双酚A的迁移量  

Mechanical Exfoliation Graphite Modified Electrode for Determination of BPA Migrated from Food Contact Materials

作　　者：沈劼[1] 程欲晓[1] 张琳[1] 周宇艳[1] 金樱华[1] 郭争云[1] 陈宁宁[2] 鲜跃仲[2] 

机构地区：[1]上海出入境检验检疫局,上海200135 [2]华东师范大学化学系,上海200241

出　　处：《理化检验（化学分册）》2015年第6期765-769,共5页Physical Testing and Chemical Analysis(Part B:Chemical Analysis)

基　　金：国家质检总局科技专项(2012IK048和2013IK017)

摘　　要：采用机械剥离石墨烯修饰电极快速检测食品接触材料中双酚A的迁移量。X射线电子衍射表征显示机械剥离石墨烯表面不存在含氧官能团，与化学还原石墨烯相比，机械剥离石墨烯对双酚A具有更好的电催化性能，降低了双酚A的氧化过电位，提高了电流响应。在优化的试验条件下，双酚A的浓度在1．0×10^-7～1．5×10^-5mol·L^-1范围内与氧化峰电流呈线性关系，检出限（3S／N）为3．0×10^-8mol·L^-1。采用该电极对食品模拟物中的双酚A进行检测，加标回收率在85．1％～104％之间，测定值的相对标准偏差（n=6）在2．7％～5．9％之间。A method based on mechanical exfoliation graphite modified electrode for detection of bisphenol A migrated from food contact materials was developed. The XRD characterization showed that oxygen-containing functional groups were not present in mechanical exfoliation graphite. Comparing with chemically reducted graphite,mechanical exfoliation graphite can lowered the oxidation over-potential and enhanced the electrochemical response of bisphenol A. Under the optimied experimental conditions,the oxidation peak current was proportional to the concentration of BPA in the range of 1. 0 × 1 0^- 7- 1. 5 × 1 0^- 5mol· L- 1,with the detection limit（ 3S /N）of 3. 0 × 1 0^- 8mol· L^- 1. The electrode was used to detect the bisphenol A migrated from food stimulants,giving recovery rates measured by standard addition method in the range of 8 5. 1 %- 1 0 4 % and RSD（ n = 6） in the range of 2. 7 %- 5. 9 %.

关 键 词：机械剥离石墨烯 修饰电极 双酚A 食品接触材料 

分 类 号：O657.1[理学—分析化学]