复杂曲面上机器人自动喷涂路径规划方法  

A Method for Generating Robot Spraying Paths on Complex Surfaces with Islands

作　　者：王金涛 徐金亭[2] 

机构地区：[1]新松机器人自动化股份有限公司,沈阳110168 [2]大连理工大学,大连116024

出　　处：《中国机械工程》2015年第14期1916-1919,共4页China Mechanical Engineering

基　　金：国家自然科学基金资助项目(51105058);中央高校基本科研业务费专项资金资助项目(DUT14QY35)

摘　　要：针对目前含有岛屿或空洞的复杂曲面上机器人喷涂路径规划中存在的问题,提出一种能够保持轮廓平行的机器人喷涂路径设计方法。利用最小二乘坐标映射原理,将被喷涂曲面映射到二维平面域,建立目标曲面与二维平面域之间的一一映射关系,然后对平面映射域的内外边界进行连续偏置,构造能够保持轮廓平行的二维偏置曲线;进而以被喷涂曲面到二维平面域的坐标映射为向导,将无干涉二维偏置曲线逆映射到被喷涂曲面上,生成能够保持轮廓平行的喷涂路径,实现多岛屿或空洞复杂曲面上三维喷绘路径设计到二维平面的降维处理。实例仿真实验结果表明,所提方法简单实用,可在含有岛屿或空洞的复杂曲面上快速地生成能够保持轮廓平行的机器人喷涂路径。A method for generating robot spraying paths on complex surface with islands was pro- posed by using the coordinate mapping theory which was used to flatten the sprayed surface onto a plane. On this plane, the spray points were calculated by iteratively offsetting the inner and outer boundaries of the planar surface. Then, using the mapping from the sprayed surface to the planar re- gion as a guide,the planar offset curves without self-intersections were mapped onto the sprayed sur- face inversely,thus forming the resulting contour-parallel spraying paths. Benefiting the mapping of the sprayed surface to the planar region,the task of generating the spaying paths was simplified from is reduced from 3D surface to 2D plane,geometric computations related to spraying path generation were considerably reduced, especially for self-intersection elimination of offset path. Finally, the pro- posed method was tested on several sample surfaces and is shown that it can generate contour-parallel spraying paths for complex surfaces nicely,especially for those with holes or islands.

关 键 词：复杂曲面 机器人喷涂 路径规划 

分 类 号：TP391[自动化与计算机技术—计算机应用技术]