电磁压制多元金属混合粉末的压型方程  

Forming equation about multivariate mixed metal powder by electromagnetic compaction

作　　者：高歌[1] 胡建华[1] 程呈[1] 吴轩[1] 张达 

机构地区：[1]武汉理工大学材料科学与工程学院,武汉430070 [2]武汉山力板带技术工程有限公司工程管理,武汉430074

出　　处：《中国有色金属学报》2015年第7期1937-1942,共6页The Chinese Journal of Nonferrous Metals

基　　金：国家自然科学基金资助项目(51475345,51205298);华中科技大学材料成形与模具技术国家重点实验室开放基金课题(P2015-01)

摘　　要：针对Ag-Cu-Zn-Sn系多元金属混合粉料制备无镉中温银基钎料进行研究,探索压坯密度与压制压力、压制模量及压制速率的关系。采取理论分析、工艺实验和软件拟合曲线相结合的方法,构建了电磁压制条件下的高速率压型方程,为电磁压制工艺的数值模拟分析提供数学模型和相应的参数,提高数值仿真的准确性和可靠性。该结果为Ag-Cu-Zn-Sn系多元金属混合粉料进行合理的电磁压制工艺设计提供一定的理论价值和工程实践指导意义。The multivariate mixed Ag-Cu-Zn-Sn metal powder used in the preparation of cadmium-free silver-based intermediate temperature filler metal was investigated. The relationships among pressed compact density and the pressing pressure, pressing modulus and suppression rate were explored. Through the combination of theoretical analysis, experiments and software fitting curve research methods, the high rate pressure type equations under the conditions of electromagnetic compaction were built. A mathematical model and corresponding parameters for numerical analysis of electromagnetic compaction process are provided, the accuracy and reliability of the numerical simulation are improved. The results provide theoretical value and practical significance of engineering for designing the electromagnetic compaction process of the multivariate mixed metal powder in the Ag-Cu-Zn-Sn system.

关 键 词：电磁压制 金属粉末 压型方程 压坯密度 

分 类 号：TG391[金属学及工艺—金属压力加工]