检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:石怀龙[1] 王建斌[1] 戴焕云[1] 邬平波[1]
机构地区:[1]西南交通大学牵引动力国家重点实验室,成都610031
出 处:《振动.测试与诊断》2015年第4期626-631,793,共6页Journal of Vibration,Measurement & Diagnosis
基 金:国家科技支撑计划资助项目(2011BAG05B04-A01-1);国家自然科学基金资助项目(U1334206);铁道部科技研究开发计划资助项目(2012J009-A)
摘 要:地铁车辆在牵引和制动阶段车体地板出现异常振动,严重影响了车辆乘坐舒适性,通过理论分析和线路试验,确定引起异常振动的原因并提出解决方案。采用短时傅里叶变换法分析试验数据,得出电机2倍转频为地板振动激扰源。建立了由电机轴、弹性联轴节和小齿轮轴组成的传动系统数学模型,说明了联轴节不对中效应下的电机和小齿轮之间的振动关系,推导出小齿轮轴空间力矩输出表达式,表明不对中效应将激起电机偶数倍转频振动,并以2倍转频振动能量最大,理论上解释了试验结果,指出减小联轴节不对中量可降低振动。减小联轴节不对中量后再次进行试验的结果表明,电机2倍转频振动显著降低,车体振动均方根值和幅值分别降低了41%和53%,车体振动减小到正常车辆水平,理论分析和试验测试结果得到相互验证。The floor of a car body experiences an abnormal vibration when a metro accelerates and brakes,which significantly deteriorates riding comfort.Theoretical analysis and field experiments are conducted to study this abnormal vibration,with resolution promoted and validation measurements.The short-time Fourier transform(STFT)time-frequency method is applied to tested data.It shows that the excitation of the abnormal floor vibration comes from the twice frequency of motor rotation.A mathematical model consisting of the motor shaft and gear rotor connected by a coupler is built to study the rotary dynamics of the traction system of the railroad vehicle′s powered bogie.Analysis illustrates that the dynamics in the traction system experience a shaft misalignment between the motor shaft and gear rotor.The output torque of the gear rotor is obtained and shows that this misalignment can result in even frequencies oscillation of motor shaft rotation with the twice frequency dominated.The measurement is explained by the analysis,and it is shown that the abnormal vibration can be alleviated by eliminating this misalignment.Validation measurements are conducted after eliminating the misalignment and show that the twice frequency vibration of motor rotation dropp significantly,which reduces the root mean square and amplitude of acceleration of the car body floor by 41% and 53%,respectively.The measurements agree with the theoretical analysis,and a high level of riding comfort is obtained.
分 类 号:TH113.1[机械工程—机械设计及理论] U270.33[机械工程—车辆工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.129.216.70