一种基于能量守恒原理的数控车削能耗模型  

An Assessment Model of Energy Consumption for NC Turning Process Based on Principle of Conservation of Energy

作　　者：黄拯滔 张超勇[1] 罗敏[2] 谢阳[1] 周志恒[1] 

机构地区：[1]华中科技大学,武汉430074 [2]湖北汽车工业学院,十堰442002

出　　处：《中国机械工程》2015年第18期2419-2426,共8页China Mechanical Engineering

基　　金：国家自然科学基金资助重点项目(51035001);国家自然科学基金资助项目(51275190);中央高校基本科研业务费专项资金资助项目(2014TS038)

摘　　要：根据机床系统的能量守恒原理,提出了一种数控车床加工过程能耗精确评估方法。参照机床系统的能量流分布,分离各能量分支的功耗,对各分支分别独立建模,最终建立数控车床系统能耗与主轴转速、进给量和材料去除率之间的函数关系。由于各分支系统建模的独立性,使得能耗模型不仅适用于数控车床系统稳定切削阶段,也适用于稳定的待机、空转和空切阶段。实验结果显示,车削过程能耗评估精度超过98%。在该方法的基础上,进一步提出改进型的机床系统单位体积能耗模型。Based on the principle of conservation of energy, an accurate assessment model of energy consumption for NC turning operation was presented. According to the energy flow of machine tool system, the power of each energy branch was separated. After modeling every branch, a function was built among energy consumption and spindle speed, feed rate and material removal rate. Because of the independence of these branches, the energy consumption model suited to the stable cutting stage,and to the stable standby and idle and cutting-free stages. The accuracy of this method is confirmed over 98% by a series of turning experiments. On the strength of this method, an improved model of specif- ic energy consumption was developed.

关 键 词：能耗模型 能量守恒 机床系统 车削过程 单位体积能耗 

分 类 号：TH186[机械工程—机械制造及自动化]