检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:汤瑞[1] 赖俊森[1] 赵文玉[1] 张海懿[1]
机构地区:[1]工业和信息化部电信研究院通信标准研究所,北京100191
出 处:《光通信研究》2015年第5期1-3,62,共4页Study on Optical Communications
基 金:国家"八六三"计划资助项目(2013AA013402);国家自然科学基金资助项目(61171076;61201260;61471128)
摘 要:针对400Gbit/s传输性能及应用问题,仿真分析了400Gbit/s不同技术方案的传输距离与频谱效率、入纤功率限制与非线性效应,结果表明,4×100Gbit/s技术可以满足骨干网1 000km以上的传输需求,而2×200Gbit/s技术则必须结合低损耗或超低损耗光纤以及新型低噪声光放大器等才可能实现。城域网、数据中心等的大带宽互联可能率先采用400Gbit/s技术,而2×200或4×100Gbit/s可以满足传输容量和传输距离的一般需求。With respect to 400 Gbit/s transmission performances and applications,this paper simulates and analyzes the trans-mission distance and spectrum efficiency based on different technical schemes,the incident power limitation and nonlinear effects.The results show that the requirements of backbone networks for over 1 000 km transmission can be met by using the 4×100 Gbit/s technology,whereas for the same purpose,the 2×200 Gbit/s technology must be used in combination with low-loss fibers and new type of low-noise amplifiers.Metropolitan Area Networks (MAN),data centers and other large bandwidth interconnections may take the lead in adopting 400 Gbit/s,2×200 Gbit/s or 4×100 Gbit/s technologies to satisfy the general requirements for transmission capacity and distance.
关 键 词:400Gbit/s传输 频谱效率 非线性 子载波
分 类 号:TN915[电子电信—通信与信息系统]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49