佛珠/手串珠数控镂铣加工研究  

Research on Beads Process with CNC Router

作　　者：王为宣 江俊谙 刘渝[1] 

机构地区：[1]北京林业大学材料科学与技术学院,北京100083

出　　处：《家具与室内装饰》2015年第8期30-32,共3页Furniture & Interior Design

基　　金：国家林业公益性行业科研专项经费项目(编号:201204702)

摘　　要：实木板材加工佛珠/手串珠都是手工操作,效率低,质量不稳定。本文通过对花梨木、酸枝木和檀木等实木板材数控镂铣加工珠球的试验,总结出了加工工艺。试验中采用了成型刀和通用平底尖刀两种镂铣加工方法,都获得了良好结果。对各种珠球加工方法的优缺点进行了对比分析,结果表明,数控镂铣是一种新的实用的珠球自动加工方法。The processing of beads with solid wood board is hand operation which efficiency is low, and the quality is not stable. In this paper, the technology has been summed up based on the CNC router tests of beads process with hardwood boards. The CNC router processing tests using shaping cutter and general conical flat cutter has obtained the good results. The advantages and disadvantages of various beads processing methods ware compared and analyzed. Results showed that CNC routing is a new practical automatic processing method for beads.

关 键 词：佛珠/手串 数控镂铣机 成型刀 平底尖刀 

分 类 号：TS934.3[轻工技术与工程]