薄板坯连铸连轧生产超薄带钢速度控制  

Ultra-thin strip speed control in flexible thin slab casting and rolling production line

作　　者：贾宝瑞[1] 栗建辉[1,2] 田亚强[2] 

机构地区：[1]河北钢铁股份有限公司唐山分公司,河北唐山063009 [2]河北联合大学河北省现代冶金技术重点实验室,河北唐山063009

出　　处：《轧钢》2015年第6期70-72,共3页Steel Rolling

摘　　要：速度制度是热连轧工艺最为重要的工艺制度之一。本文结合唐钢FTSR生产线轧机布置特点,针对开发1.0mm超薄规格带钢中存在的中间坯温降大、轧制过程稳定性差、终轧温度命中率低、频繁甩尾等问题,自主开发了粗轧高速穿帯、精轧梯度轧制,以及抛钢速度、加速度和时序控制等技术。通过具体分析与优化,1.0mm超薄规格单轧程产量达到555t,实现了稳定批量生产。Speed system is one oi the most important process diate billet temperature dropping, poor stability of rolling process, lower hit rate of final rolling temperature and frequent tail out, in developing 1.0 mm thin gauge strip on FTSR production line of Tangsteel, some techniques were developed and applied, which were high-speed threading of roughing rolling, gradient finishing rolling, acceleration and time sequence control, etc. Through the concrete analysis and optimization, the single rolling process output of 1.0 mm ultra thin gauge strip was 555 t, and the stable mass production was realized.

关 键 词：薄板坏铸轧 超薄规格 速度控制 稳定轧制 

分 类 号：TG335.9[金属学及工艺—金属压力加工]