NP569484-NP644537圆锥滚子轴承滚子-滚道凸度有限元分析  

Finite Element Analysis on Contact Stress of the Roller-Raceway for Tapered Roller Bearings NP569484-NP644537

作　　者：吴飞科[1] 刘赛[1] 严剑刚 杨国策 宋钰蕾 

机构地区：[1]上海第二工业大学工程训练中心,上海201209

出　　处：《上海第二工业大学学报》2015年第4期303-311,共9页Journal of Shanghai Polytechnic University

基　　金：2015年度上海第二工业大学校基金(No.A01GY15GX58)资助

摘　　要：圆锥轴承滚子-滚道凸度设计包括轮廓设计和凸度量设计。在通用的对数凸型轮廓基础上,凸度量在滚子和滚道上的分配是一个有待研究的课题。通过计算特定工况下滚子-滚道的接触应力水平,来衡量设计的合理性。以NP569484-NP644537圆锥滚子轴承为例,用正交法分组,将取样轴承的内、外圈以及滚子的凸度分为若干匹配等级,并从中选取数种特征匹配;对各种匹配关系进行有限元分析,在保证有充分的接触长度的同时,接触应力应满足工程条件。The crowning design of tapered roller bearing includes the profile design and the convex metric design. Based on the general logarithmically convex type, the distribution of convex metric on the roller-raceway is a subject to be studied in the future. Through the calculation of particular condition for the level of roller-raceway contact stress, the design rationality is evaluated. The tapered roller bearings NP569484-NP644537 as an example, using the orthogonal groups method, matching several level classification for the roller-raceway of sampling bearing to select feature matching, the finite element analysis is done for feature matching. The contact stress should meet the engineering conditions meanwhile ensure the sufficient contact length is ensured.

关 键 词：圆锥滚子轴承 载荷分布 接触应力 凸度设计 正交法 有限元分析 

分 类 号：TH133.3[机械工程—机械制造及自动化]