两井几何定向模拟实验系统建设及应用研究  

Research on Construction and Application of Two Shafts Orientation Simulation Experiment System of mine

作　　者：王磊 王列平[1] 张鲜妮[1] 

机构地区：[1]安徽理工大学测绘学院,安徽淮南232001

出　　处：《矿山测量》2015年第6期103-105,6,共3页Mine Surveying

基　　金：安徽省博士后基金(2014B019);安徽省高等学校省级质量工程项目(2015jyxm127)

摘　　要：为了缓解当前矿山测量实践教学中两井几何定向实习难以开展的困窘局面,文中提出了一种地面模拟实验系统建设思路,即利用本校教学附楼楼顶面模拟工业广场,教学附楼主体模拟地层,用附楼附近的地面模拟某开采水平。为了达到模拟实验系统对工程现场的逼真模拟,提出了模拟实验系统需要满足测量系统相似、测量方法相似和测量场景相似三个原则,并以此为准则对两井几何定向测量模拟实验系统进行了详细建设。最后通过教学实践证明:该模拟实验系统取得了良好的效果,文中研究成果对矿山测量实验教学具有较好的参考意义。In order to alleviate the dilemma that two shafts orientation was difficult to carry out in mine surveying practice teaching well.In this paper,the ground simulation experiment system construction idea was proposed that industrial square was simulated using the school teaching building roof surface,the stratum was simulated by the teaching annex body,and a mining level was simulated with the attached building near the ground.In order to achieve that realistic simulation of field engineering with simulation experiment system,three-similitude principles which were the similar simulation experiment system to meet the measurement system,measuring method and measuring scenario were put forward.Two shafts geometric orientation simulation measurement system was built in detail based on the criteria.At last,through the teaching practice proves that the simulation system had obtained the good effect.Research results had a good reference on mine surveying experiment teaching.

关 键 词：矿山测量 两井几何定向 模拟实验系统 实践教学 

分 类 号：G642.4[文化科学—高等教育学]