θFXZ型测量机的回转轴线标定方法  

The Calibration Method of Rotary Axis for the θFXZ Measuring Machine

作　　者：谭文斌[1,2] 张起鹏[1] 李醒飞[1] 张晨阳[2] 

机构地区：[1]天津大学精密测试技术及仪器国家重点实验室,天津300072 [2]天津商业大学机械工程学院,天津300131

出　　处：《机械科学与技术》2016年第2期285-289,共5页Mechanical Science and Technology for Aerospace Engineering

基　　金：国家自然科学基金项目(50975206);精密测试技术及仪器国家重点实验室开放基金项目(PIL1407)资助

摘　　要：回转轴线的标定技术是保证θFXZ型测量机测量精度的一项关键技术。针对该型测量机没有y方向运动的特点,分析了其内外径测量原理,讨论了回转轴线标定误差与内外径测量误差的关系,并提出了一种基于环形标准件内孔、外圆的测量结果,快速标定回转轴线的方法。试验结果表明:利用该方法进行θFXZ型测量机的回转轴线标定,标定后,测量机对其它型号环形标准件的测量误差在±0.001 mm以内。该方法实现了对回转轴线的精确标定,同时操作简单,可以制定标定软件,实现回转轴线的软件自动标定。θFXZ measuring machine. Considering that there is not motion in y direction for this type measuring machine, the measurement principles of inner and outer diameters have been analyzed. Moreover, the relationship between the calibration error of rotary axis and the measurement errors of inner and outer diameters has been discussed. Then a fast calibration method of rotation axis has been proposed, and it is based on the measurement results of inner hole and outer circle in the standard ring. The experimental results indicate that measurement errors of the other standard rings are in the range of ± 0.001 mm after calibrating the rotary axis with the present technique. This aforementioned calibration technique is able to achieve the calibration accuracy of the rotary axis. Besides, it is easy to implement the software, and the computer software can be developed to fulfill automatic calibration of the rotary axis.

关 键 词：坐标测量机 回转轴线 标定误差 测量误差 

分 类 号：TG8[金属学及工艺—公差测量技术]