检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]扬州大学建筑科学与工程学院,江苏扬州225127
出 处:《南京理工大学学报》2015年第6期744-749,共6页Journal of Nanjing University of Science and Technology
基 金:国家自然科学基金(50978224;51278445;51308490;51278230);江苏省自然科学基金(BK20130450);住房和城乡建设部科学技术计划项目(2013-K4-17);江苏省高校自然科学基金(13KJB560015);扬州市科技计划项目(2012149)
摘 要:为研究预应力钢筋混凝土结构的耐久性,在预应力度分别为0.35、0.52和0.62的预应力混凝土梁试件分别经历50、75次冻融循环作用和氯离子溶液腐蚀后,对其进行静力受弯试验。研究表明:动弹性模量随冻融循环次数的增加下降较快,预应力度高的试件动弹性模量损失较小;预应力度分别为0.35、0.52和0.62的试件,在冻融循环75次后的开裂荷载较冻融循环50次的试件分别下降6.9%、6.7%、5.7%,极限荷载分别下降14.7%、17.5%、11.6%;冻融循环50次后,预应力度为0.52和0.62的试件较预应力度为0.35试件的开裂荷载分别高20%、17.85%,极限荷载分别高21.4%、8.7%;冻融循环75次后,预应力度为0.52和0.62的试件较预应力度为0.35试件的开裂荷载分别高23.8%、19.0%,极限荷载分别高24.1%、19.4%;氯离子侵蚀在短期内对试件极限承载力影响较小。In order to study the durability of prestressed concrete structures,6 prestressed concrete beams with partial prestressing ratios of 0. 35,0. 52 and 0. 62 are tested by static flexural experiments after experiencing freeze-thaw cycles and chloride penetration for 50 and 75 times. The results show that the concrete dynamic elastic modulus decrease fast with the increase of the freeze-thaw cycle number,and the dynamic elastic modulus of tested specimens with the high partial prestressing ratios decrease less; for components with prestressing ratios of 0. 35,0. 52 and 0. 62,comparing the results after 50 times freeze-thaw cycles with the results after 75 times freeze-thaw cycles,the cracking loads decrease 6. 9%,6. 7% and 5. 7% respectively and the ultimate loads decrease 4. 7%,17.5% and 11. 6% respectively; after 50 times freeze-thaw cycles,the cracking loads of components with prestressing ratios of 0. 52 and 0. 62 are higher than those of 0. 35 by 20%,17. 85% respectively,and the ultimate loads are higher by 21. 4%,8. 7% respectively; after 75 times freeze-thaw cycles,the cracking loads of components with prestressing ratios of 0. 52 and 0. 62 are higher than those of 0.35 by 23. 8%,19. 0% respectively,and the ultimate loads are higher by 24. 1%,19. 4% respectively;chloride penetration effects the bearing capacity of the components less.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222