三维织机双向开口机构的虚拟样机研究  

Research on the virtual prototype of the bidirectional shedding mechanism of three-dimensional loom

作　　者：赵梅[1] 王益轩[1] 路超[1] 韩斌斌[1] 陈荣荣[1] 

机构地区：[1]西安工程大学机电工程学院,西安710048

出　　处：《产业用纺织品》2015年第12期27-31,共5页Technical Textiles

基　　金：陕西省教育厅产业化培育项目(2013JC17)

摘　　要：构建用于织造完全交织的三维机织预制件的双向开口机构的原理模型,介绍其工作原理并进行仿真设计。建立双向开口机构的虚拟样机模型并进行仿真设计,以研究双向开口机构的运动规律。在ADAMS中仿真时,以织造双向平纹预制件为例,通过合理控制伺服电机,达到了织造要求并得到了较好的开口机构运动规律,为三维机织预制件的织造提供了参考。principle model of bidirectional shedding mechanism for weaving a fully intertwined three- nsional textile perform was constructed,related working principle was introduced and simulation in ADAMS had been completed for study the motion characteristics of the bidirectional shedding mechanism. During the simulation in ADAMS, bidirectional plain woven perform was woven as an example,weaving requirements could be met by controlling the motion of servo motor reasonably and good motion characteristics was obtained, which provided a reference for the weaving of three- dimensional pertbrm.

关 键 词：三维织机 双向开口机构 虚拟样机 ADAMS 

分 类 号：TS103.33[轻工技术与工程—纺织工程]