直接甲醇燃料电池用Nafion~/柱[5]芳烃复合膜的制备及其性能研究  

Preparation and Performance of Nafion~/Pillar[5] Arene Composite Membrane for Direct Methanol Fuel Cells

作　　者：张永明[1] 邹静[2] 苗宗成[1] 赵阳[1] 

机构地区：[1]西京学院应用统计与理学系,陕西西安710123 [2]陕西国防工业职业技术学院化学工程系,陕西西安710300

出　　处：《中国塑料》2016年第4期69-75,共7页China Plastics

基　　金：陕西省自然科学基础研究计划项目(2013JQ8043);陕西省教育厅科研计划项目(11JK0845、15JK2188);西京学院科研基金(XJ140223)

摘　　要：制备了一种新型Nafion~/柱[5]芳烃复合阻醇膜,通过傅里叶变换红外分析仪、核磁共振仪、扫描电子显微镜、热重分析仪等手段对柱[5]芳烃及复合膜的结构与性能进行了表征和测试。结果表明,该复合膜具有良好的热稳定性,较高的吸水率和较低的溶胀度;且柱[5]芳烃能有效地阻碍甲醇的透过,室温下甲醇渗透系数从Nafion~115膜的8.1×10^(-7)cm^2/s降低到Nafion~/柱[5]芳烃膜的2.1×10^(-7)cm^2/s;电流密度为65 mA/cm^2条件下,Nafion~/柱[5]芳烃复合膜的电池功率最高达到15.6 mW/cm^2,可用在直接甲醇燃料电池中。A Nation/pillar [5] composite membrane was prepared and was characterized by Fourier transform infrared analyzer, nuclear magnetic resonance spectrometer, scanning electron microscopy, thermo gravimetric analyzer. It showed that the Nafion/pillar [5] composite membrane had a good thermal stability, high water absorption, and low swelling ratio, and the pillar [5] could effectively hinder the penetration of methanol, the methanol permeability at room temperature was as low as 2.1×10^-7 cm2/s. The power of direct methanol fuel cell （DMFC） with Nafion/pillar [5] membrane was 15.6 mW/cm2 at a current density of 65 mA/cm2.

关 键 词：NAFION 芳烃 复合膜 直接甲醇燃料电池 甲醇渗透率 

分 类 号：TM911.4[电气工程—电力电子与电力传动]