一种构建嵌入式Linux根文件系统的方法  

A method of building embedded Linux root file system

作　　者：刘二钢[1] 

机构地区：[1]海南大学信息科学技术学院,海南海口570228

出　　处：《电子设计工程》2016年第9期160-162,165,共4页Electronic Design Engineering

基　　金：海南省自然科学基金资助项目(614225)

摘　　要：根文件系统是构建嵌入式Linux系统的非常重要的组成部分。文中主要以制作Yaffs2根文件系统为例,研究如何使用Busy Box构建嵌入式Linux的根文件系统,包括Busy Box的配置、编译和安装,以及在嵌入式Linux环境下生成根文件系统映像文件的方法。文中所介绍的方法能够成功地在ARM开发板中移植和运行,为嵌入式系统的开发提出了一种简单易行的研究思路。The root file system is a very important part of building the embedded Linux system. This paper mainly makes Yaffs2 root file system as an example of studying how to use the BusyBox to build embedded Linux root file system, including the BusyBox configuration, compilation and installation, and generates the system image files of root file in the embedded Linux environment. The method introduced in the paper is able to transplant and run successfully in the ARM development board, and puts forward a kind of feasible research ideas for the development of embedded system.

关 键 词：BUSY BOX YAFFS2 嵌入式LINUX 文件系统 

分 类 号：TN99[电子电信—信号与信息处理]