新型复合曲面型砧锻造过程实验验证  

Experiment Validation of New Composite Surface-anvil Forging Process

作　　者：李静[1] 孟祥龙[1] 李莉[1] 于晶晶[2] 

机构地区：[1]邢台职业技术学院机电工程系,河北邢台054035 [2]河北科技师范学院机电工程学院,河北秦皇岛066004

出　　处：《铸造技术》2016年第5期995-997,共3页Foundry Technology

基　　金：国家自然科学基金重点项目(50435010);973重大基础研究前期研究专项项目(2004CCA066000)

摘　　要：在有限元数值模拟基础上,根据模拟所得的最优型砧工艺参数,利用线切割技术加工一对新型复合曲面型砧。采用铅试件代替在高温状态下的钢,以KD法为基础,在1 000 k N液压材料实验机上进行有效锻合区域的实验验证。结果表明,有效锻合区域的有限元计算结果与实验结果基本吻合,证明了M型砧的优越性。On the basis of finite element numerical simulation, according to the optimal anvil process parameters, the wire cutting technology was used to process a pair of new composite surface-anvil. Using lead specimen instead of steel at high temperature, on the basis of KD method, experiments were carried out to verify the effective forging alloy region in 1 000 k N hydraulic material test machine. The results show that the finite element results of effective forging alloy region basically accord with the experimental results, which proved the superiority of the M shape anvil.

关 键 词：大型轧辊锻件 复合曲面型砧 有限元方法 数值模拟 锻造方法 

分 类 号：TG316[金属学及工艺—金属压力加工]