圆锥滚子轴承有限元仿真分析  

Finite Element Analysis on Tapered Roller Bearings

作　　者：殊海燕 贺成柱 袁虎成 贾洪仁 

机构地区：[1]甘肃省机械科学研究院甘肃省先进设计与制造技术工程实验室,兰州730030

出　　处：《煤矿机械》2016年第6期68-71,共4页Coal Mine Machinery

基　　金：兰州市人才创新创业科技计划项目(2014-RC-53)

摘　　要：应用ANSYS软件对圆锥滚子轴承进行有限元仿真分析,在计算滚子与滚道的应力、接触变形及其分布状态的基础上,确定合适的凸度形式及滚子与滚道的最佳凸度匹配关系。分析结果表明,在一定条件下带凸度的圆锥滚子轴承可以最大限度地降低滚子和内外圈接触引起的边界应力集中。Finite element simulation analysis on the tapered roller bearings by using ANSYS software. On the basis of ealeulation of the roller and raceway stress, contact deformation and its distribution,the proper crowning form and option crowning match relation between roller and raceway are determined. The results show that the border contact stress concentration occurred between rollers and inner, outer ring raceways of tapered roller bearings with the crowning can be reduced maximumly under certain conditions.

关 键 词：圆锥滚子轴承 有限元仿真 凸度 应力集中 

分 类 号：TH133.3[机械工程—机械制造及自动化] O242.21[理学—计算数学]