磁控溅射沉积W-Ti薄膜的结构与性能  

Structure and properties of W-Ti thin films deposited by magnetron sputtering

作　　者：孙国琪[1] 孙勇[1] 郭中正[1] 段永华[1] Sun Guoqi Sun Yong Guo Zhongzheng Duan Yonghua(School of Materials Science and Engineering, Kunming University of Science and Technology, Kunming Yunnan 650093, Chin)

机构地区：[1]昆明理工大学材料科学与工程学院,云南昆明650093

出　　处：《金属热处理》2016年第10期90-94,共5页Heat Treatment of Metals

基　　金：国家自然科学基金(50871049);云南省自然科学基金重点资助项目(2004E0004Z)

摘　　要：采用复合靶磁控共溅射方法在p型(100)单晶硅衬底上制备了不同Ti含量的W-Ti薄膜,并与纯W和纯Ti薄膜作对比。采用XRD、SEM、AFM、显微硬度计和四探针电阻仪对薄膜的结构、成分及性能进行分析表征。结果表明,W-Ti薄膜呈细晶粒多晶结构,Ti含量较低时,W-Ti薄膜呈体心立方相结构,存在W基W(Ti)固溶体。Ti含量较高时,还出现hcp富Ti相。W-Ti薄膜的显微硬度随Ti含量的增加先增后减,而电阻率则随Ti含量的增加而增大。W-Ti薄膜显微硬度均高于纯Ti薄膜,电阻率则高于纯W而低于纯Ti薄膜。W-Ti thin films with different Ti contents were prepared by composite target magnetron co-sputtering technology on the p-type（ 100） single crystal silicon substrates,and compared with pure W and pure Ti films. The structure,composition and properties of thin films were characterized by XRD,SEM,AFM,microhardness tester and four-probe resistance meter. The results show that W-Ti thin films possess fine-grained polycrystalline structure. W-Ti thin films with lower Ti content are bcc structure along with the W-based W（ Ti） solid solution,while with higher Ti content W-Ti thin films have hcp Ti-rich phase. With the increase of Ti content,the microhardness of W-Ti thin film increases first and then decreases,and the resistivity increases. The microhardness of W-Ti thin film is higher than that of pure Ti thin film,whereas the resistivity of W-Ti thin film is higher than that of pure W thin film but lower than that of pure Ti thin film.

关 键 词：W-Ti薄膜 磁控共溅射 结构 显微硬度 电阻率 

分 类 号：TB43[一般工业技术] TG146.411[一般工业技术—材料科学与工程]