检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邢化朝 刘俊杰[2] 许潇[2] 魏伟胜[1] 范燕[1] 马一博[1]
机构地区:[1]中国石油大学(北京)化学工程学院,北京102249 [2]中国计量科学研究院纳米新材料计量研究所,北京100029
出 处:《中国粉体技术》2016年第5期54-57,共4页China Powder Science and Technology
基 金:国家科技支撑计划项目;编号:2011BAK15B05
摘 要:为了实现扫描电子显微镜(SEM)对纳米颗粒粒径的准确测量,研究了一种SEM放大倍数校准和光栅间距测量的方法;在SEM的不同放大倍数下对光栅纳米结构样板成像,运用MATLAB软件对显微镜图像进行灰度处理并读取灰度图像的亮度值数据,通过确定顶线、基线、底线位置,有效消除成像质量及数据处理等的误差,准确确定质心横坐标,采用质心算法求取平均光栅间距,通过与光栅间距标称值比较计算校准系数和校准误差;为验证放大倍率校准结果的可靠性,对纳米颗粒粒度标准物质进行测量。实际测量的平均粒径与标准值一致,表明该校准方法准确可靠,可有效避免图像质量和人为因素对测量结果的影响,达到对纳米和亚微米颗粒粒径准确测量的目的。For the purpose of accurately measuring nanoparticle size by scanning electron microscope(SEM) method, SEM magnification calibration method and micrometers spacing measurement method were developed. SEM digital images of micrometers were firstly captured and obtained, and MATLAB software was used to convert digital images into grayscale images automatically, and then the brightness data of grayscale images could be obtained. Based on this work, after the determination of the top line, baseline, the bottom line position of peak structure in the grayscale images, centroid position could be accurately obtained and the potential error of imaging and data processing could be effectively eliminated. The average micrometers spacing were calculated by using the centroid algorithm, and finally, the calibration coefficient and calibration error of SEM magnification could be calculated by comparing with the certified value of micrometer spacing. The reliability of the SEM calibration results were verified by measuring a particle size certified reference materials(CRMs) using calibrated SEM, and a consistent results finally be obtained with the certified value of CRMs. So from the result, a conclusion can be drawn that our developed SEM magnification calibration method and micrometers spacing measurement method are effective and reliable, which can effectively avoid the influence of poor image quality and artificial factors on the measurement results to obtain accurate particle size results.
分 类 号:TB99[一般工业技术—计量学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.149.249.140