检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]解放军理工大学理学院,南京211101 [2]南京航空航天大学机械结构力学及控制国家重点实验室,南京210016 [3]北京理工大学宇航学院,北京100081
出 处:《力学学报》2016年第6期1372-1381,共10页Chinese Journal of Theoretical and Applied Mechanics
基 金:国家自然科学基金资助项目(11372354,11290151)
摘 要:基于计算机的数字采样控制对离散信号进行运算并向作动器提供控制输入,是当前的主流控制技术.数字采样控制系统是这样一类控制系统,其控制对象由微分方程(组)描述,而控制律由离散采样信号给出.以采样PD(proportional-derivative)反馈作用下的单自由度力控制系统为例,基于离散系统的稳定性分析方法,研究采样控制律对控制系统稳定性的影响.为了突出采样反馈的作用,将系统取为无刚度、无阻尼的最简单形式.不同于已有研究假设位移采样信号与速度采样信号相互同步,本文研究当位移采样信号与速度采样信号不同步时受控系统的稳定性,发现位移采样信号与速度采样信号的采样周期不同组合对受控系统在增益平面上的稳定性区域有重要影响.结果表明,对所关心的三种数字采样反馈控制律,当位移采样信号滞后于速度采样信号一个采样周期时,受控系统具有最大的稳定性区域且对相同的增益值可以有最好的稳定效果.论文对这种现象进行分析,给出了一种力学解释.Sampled-data control,or digital control,is a major control technology in modern engineering.Based on digital computers,it provides actuators with control inputs in terms of discrete signals.A sampled-data control system is a controlled time-continuous system under sampled-data control.The paper investigates the effects of sampled-data controls on the system stability via an SDOF force control system under sampled PD(proportional-derivative) feedbacks,by means of stability analysis for discrete systems.In order to highlight the role of the sampled-data controls,the uncontrolled system is assumed to be fully free.Unlike in the previous studies where the sampled displacement signal and the sampled velocity signal are synchronic,the study focuses on the system stability for the case when the sampled displacement signal and the sampled velocity signal are not synchronic.A key observation is that when the controller uses the sampled velocity signal as well as the sampled displacement signal delayed an additional sampling period,the controlled system admits a largest stable region of the feedback gains and it decays fastest to the unique equilibrium,among the three sampled-data controllers.The paper gives a discussion of this phenomenon from the viewpoint of mechanics.
分 类 号:O317.1[理学—一般力学与力学基础] O302[理学—力学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145