增压浸没燃烧装置中高反压燃烧器数值模拟研究  

Numerical Simulation of the High Pressure Burner Applied in the Pressurized Submerged Combustion Evaporator

作　　者：宫小龙 朱庆霞 冯青 刘中良[2] 江瀚[2] 

机构地区：[1]景德镇陶瓷大学材料科学与工程学院,江西景德镇333403 [2]北京工业大学环境与能源工程学院,北京100124

出　　处：《陶瓷学报》2016年第5期541-546,共6页Journal of Ceramics

基　　金：江西省科技厅社会发展领域重点项目(2015BBG70022);江西省教育厅科技项目(GJJ14636)

摘　　要：分析了传统浸没燃烧技术的特点和不足,研制出增压浸没燃烧蒸发器装置。借助Fluent软件研究轴对称燃烧器在5-30atm压力下的燃烧特性。模拟计算结果表明,压力的增大提高了燃烧反应速率,强化了燃烧性能,燃料燃烧更充分;随着压力不断提高,燃烧反应起始位置向气流上游移动;火焰最高温度不断升高;CO_2和NO_X浓度也相应增加。仿真结果与前人预测结果对比,二者基本吻合。证明高反压燃烧器十分适合在增压浸没燃烧技术中应用。Benefits and disadvantages of conventional submerged combustion technology are expatiated, and pressurized submergedcombustion device with higher efficiency and less pollution is newly developed. In order to investigate the effect of pressure on combustioncharacteristics, numerical simulation of methane-air flame under 5 and 30 atmospheres in an axisymmetric chamber is carried out by meansof a Fluent software. The results show that the increases of pressure accelerate the reaction rate of air and methane and make the fuel burnabundantly, enhancing the combustion performance： the position of combustion commencement moves towards the upstream of the air; thetop flame temperature increases, so do the CO2 and NOX concentrations. The computed results are in good agreement with the predictions fromprevious studies. It’s proved that high pressure combustion burner is very suitable for pressurized combustion evaporator.

关 键 词：增压浸没燃烧 高反压 燃烧器 数值模拟 

分 类 号：TQ174.6[化学工程—陶瓷工业]