基于网络的弧焊过程多目标监测系统  

Multi-objective monitoring system based on network for arc welding process

作　　者：高吉军 闫志鸿[1] 陈树君[1] 

机构地区：[1]北京工业大学机械工程及应用电子技术学院,北京100124

出　　处：《电焊机》2016年第12期53-58,共6页Electric Welding Machine

摘　　要：设计了一套针对弧焊过程的多目标监测系统,该系统由电流电压传感器、下位机采集与处理系统、交换机、PC组成,通过组网的方式实现了一对多的在线监测。下位机采集与处理系统可以实时采集和处理不同焊接工位的焊接参数,并将结果上传至PC端,PC端的可视化界面同时监测多台焊机的焊接参数分析结果,对于有可能存在焊接质量问题的数据进行保存并预警,以提示工人改善焊接参数或操作手法,保证焊接质量。Designed a set of multi-objective monitoring system for the arc welding process. The system consists of current and voltage sensor, control system,switch and PC. This paper achieved multi-objective on-line monitoring by local area network. The control system acquired the welding parameters of different welding stations in real-time, and transferred the parameters to the PC. And then the visual interface of the PC displayed the analysis resuhs. When welding parameter error,the monitoring system would alarm through the alarm lamp in welding position. The monitoring system could greatly improve the quality of welding.

关 键 词：弧焊 嵌入式系统 数据采集 TCP/IP 

分 类 号：TG434.5[金属学及工艺—焊接]