PP/GMT片材骨架材料——玻纤毡  

PP/GMT SHEETS REINFORCEMENT: GLASS FIBER MAT

作　　者：路慧玲[1] 朱永全[1] 戴干策[1] 

机构地区：[1]华东理工大学聚合物加工研究室,上海200237

出　　处：《复合材料学报》2002年第4期38-41,共4页Acta Materiae Compositae Sinica

基　　金：国家 8 63计划项目 (715 -0 12 -0 0 1-2 )

摘　　要：玻璃纤维毡种类及其结构对熔体浸渍、片材孔隙率、力学性能及预热膨化有着很大影响。实验研究表明 ,PP熔体浸渍连续针刺玻纤毡的渗透率较大 ,所得片材孔隙率最低 ,且具有均衡的力学性能。说明连续玻璃纤维原丝针刺毡的立体弹性结构有利于熔体的浸渍和气泡的排除 ,是较理想的 GMT增强材料。The type of glass fiber mats and their configuration strongly affect the melt impregnation, porosity, mechanical properties and the loft ratio during the preheating process of GMT sheets. The configuration of the snitched continuous glass fiber mat is an elastic structure, and that is good for the melt impregnation and the elimination of the air in the sheets. The experimental results show that the snitched continuous glass fiber mat is an ideal reinforcement for GMT sheets, and it has a higher permeability than the chopped and complex glass fiber mat. The sheets reinforced by the snitched continuous glass fiber mat have a lower porosity, and their mechanical properties are balanced.

关 键 词：PP/GMT片材 骨架材料 玻璃纤维毡 孔隙率 力学性能 膨化 热塑性树脂 复合材料 

分 类 号：TB332[一般工业技术—材料科学与工程]