检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴勇海[1]
机构地区:[1]国网福建省电力有限公司龙岩供电公司,福建龙岩364000
出 处:《电气自动化》2017年第2期72-74,共3页Electrical Automation
摘 要:利用TCSC可以平滑地调节阻抗,实现对不同线路参数或不同负荷的线路进行电压调节,稳定负荷侧电压。对线路电压调节时考虑线路横向压降的影响,从而得到串联补偿容抗计算公式;由于晶闸管的导通压降会影响TCSC的等效基波容抗,因而采用串接受控电压源来消除影响;最后通过TCSC对辐射线路电压调节的仿真分析,说明仿真时通过串接受控电压源可以消除晶闸管导通压降对调压的影响,而在实际应用中只需对查表进行修正,则同样可实现对电压进行精确调节。Through TCSC we can adjust impedance smoothly, realize voltage regulation for different line parameters or lines with different loads, and stabilize load-side voltage. The impact of line lateral voltage drop is considered in line voltage regulation, and the calculation formula is obtained for the capacitive reactance for series compensation. As the turn-on voltage drop of the thyristor may affect the capacitive reactance of the equivalent fundamental frequency of TCSC, a series controlled voltage source is used to eliminate the influence. Finally, simulation analysis of voltage regulation on the radial supply line through TCSC shows that the series controlled voltage source in the simulation can eliminate the impact of the thyristor turn-on voltage drop upon voltage regulation. In practical applications, what is required for accurate voltage regulation is just to adjust the lookup table.
关 键 词:中压配电网 串联调压 横向压降 TCSC 导通压降
分 类 号:TM712[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222