装饰微薄木胶合工艺优化技术研究  

Study on the Optimization of Decorative Micro-veneer Bonding Technology

作　　者：沈金祥 杨旭 李小科 张建[3] 

机构地区：[1]德华兔宝宝装饰新材股份有限公司,浙江湖州313200 [2]浙江省木业产品质量检测中心,浙江湖州313009 [3]浙江省林业科学研究院浙江省竹类研究重点实验室,浙江杭州310023

出　　处：《林业机械与木工设备》2017年第5期40-43,共4页Forestry Machinery & Woodworking Equipment

基　　金：国家林业局行业标准制修订项目(2014-LY-069)

摘　　要：采用Design Expert软件,以横向抗张强度为检测指标,以热压时间、热压温度和涂胶量作为影响因素,对装饰微薄木胶合工艺进行优化研究,得到装饰微薄木横向抗张强度与各因素变量之间的数学模型。优化后的装饰微薄木胶合工艺为热压温度110℃、热压时间60 s、涂胶量20 g/m^2;装饰微薄木横向抗张强度达到0.90 N/mm,约为优化前的2倍。Using the Design Expert software,the optimization of decorative micro - veneer bonding technology is stud-ied, with the transverse tensile strength as a testing indicator, with hot pressing temperature, hot pressing time and glue quantity as three influencing factors,with a mathematic model between the transverse tensile strength of decora-tive micro - veneer and each factor variable obtained. The optimized decorative micro - veneer bonding technology involves hot pressing temperature of 110 XI ,hot pressing time of 60 s and glue quantity 20 g/m^2. The transverse ten -sile strength of decorative micro - veneer can reach up to 0. 90 N/mm ,2 times higher than that before optimization.

关 键 词：装饰微薄木 无纺布 横向抗张强度 优化 

分 类 号：TS642[轻工技术与工程]