检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]北京科技大学能源与环境工程学院,北京100083
出 处:《工程科学学报》2017年第4期574-580,共7页Chinese Journal of Engineering
基 金:中央高校基本科研业务费专项资金资助项目(FRF-TP-15-022A3)
摘 要:基于传热反问题,建立了高炉炉衬侵蚀过程的数学模型,确定了模型的边界条件,并采用共轭梯度法将反问题分解为三个问题:正问题、灵敏度问题和伴随问题进行求解.通过不同形状函数的反演结果证明了其可行性,并分别研究初始猜测形状曲线、测点数等对反演结果的影响.研究结果表明,初始猜测曲线的选取对反演结果影响很小,充分说明该方法不受初始猜测曲线的限制,具有较好的通用性.而测点数的选取对反演结果有一定的影响,测点数越多,曲线特征被捕捉的越好.但在保证得到曲线特征的前提下,较少的测点数也能得到比较满意的反演结果,平均相对误差控制在3%以内.A blast furnace lining mathematical model was established based on the inverse heat transfer problem. After determining the boundary conditions of the model,this inverse heat transfer problem is divided into three problems which are the direct problem,the sensitivity problem and the adjoint problem,and these were solved using the conjugate gradient method. The feasibility of this model was proved by the inversion results of different shape functions and then it was discussed that the initial guess shape and number of measurement points effect on the inversion results. The results show that the accuracy of the inverse solution is independent of the the initial guess shape,but the number of measurement points has some impact on these results,whereby the more points are measured,the better the curve features are captured. An accurate inverse solution can be obtained with fewer measurement points and an average relative error within 3%,even though the arrangement of more points can achieve a slightly better solution.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.127