基于自修复涂料的脲醛树脂微胶囊的制备及其表征  被引量:9

Preparation and Characterization of Urea-Formaldehyde Resin Microcapsules for Self-Healing Coatings

在线阅读下载全文

作  者:张微[1] 张志刚[1] 付广艳[2] 刘群[2] 

机构地区:[1]沈阳化工大学应用化学学院,辽宁沈阳110142 [2]沈阳化工大学机械工程学院,辽宁沈阳110142

出  处:《材料保护》2017年第4期64-68,共5页Materials Protection

基  金:辽宁省自然科学基金项目(2014020139)资助

摘  要:目前,关于包覆桐油的脲醛树脂微胶囊用于自修复涂料的制备研究较少。以桐油为芯材,采用原位聚合方式在桐油表面制备了脲醛树脂微胶囊;采用扫描电镜(SEM)、光学显微镜(OM)、热重分析仪(TGA)以及红外光谱(IR)对胶囊的微观形貌、热稳定性及化学结构进行了表征。结果表明:当预聚合反应p H=8.5,采用OP-10作为乳化剂,其用量为芯材质量的5%,搅拌转速为900 r/min,并控制酸化时间为90 min时,可制得外形完整、尺寸均匀的球形微胶囊,微胶囊表面略粗糙,其直径约为200μm,包封闭率达85.1%,其初始热分解温度为205℃左右。Urea-formaldehyde resin microcapsules for self-healing coating were prepared by in-situ polymerization with tung oil as core material.The surface micro-morphology of the microcapsules was observed by optical microscope and SEM.The chemical structure and thermal stability of the microcapsules were analyzed by FT-IR and thermal gravimetric analyzer respectively.Results showed that the initial decomposition temperature of the capsule wall was about 205 ℃.The optimal conditions were obtained as follows:pH =8.5 for pre-polymerization,emulsifier (OP-10) dosage of 5%,stirring rate of 900 r/min,and acidification time of 90 min.The prepared microcapsules were characterized by spherical shape with a rough surface and an average diameter of 200 μm,and the envelop rate reached 85.1%.

关 键 词:原位聚合 自修复涂料 脲醛树脂 微胶囊 形貌 结构 热稳定性 包封率 

分 类 号:TQ630.43[化学工程—精细化工]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象