水射流剥离扇贝闭壳肌的试验与参数优化  

Experiment and operating parameter optimization using water jet technology for scallops shucking processing

作　　者：王家忠[1] 杨淑华[1] 谢秋阳 弋景刚[1] 

机构地区：[1]河北农业大学机电工程学院,保定071001

出　　处：《农业工程学报》2017年第7期289-294,共6页Transactions of the Chinese Society of Agricultural Engineering

基　　金：海洋公益性行业科研专项(201205031);河北省科技支撑计划(12227169)

摘　　要：为了满足扇贝闭壳肌剥离的安全性、经济性和高效性要求,该文将水射流技术应用于海湾扇贝闭壳肌剥离中并进行试验研究。为了保证闭壳肌的剥离质量和效率,优化水射流喷射路径,对水射流喷射路径进行拟合,得到闭壳肌剥离时水射流的初始入射角。以闭壳肌剥离效果的感官评分为考核目标进行了剥离试验,通过单因素分析,确定了射流压力、入射角度和喷射距离的取值范围。应用Box-Behnken design进行试验设计,并应用响应面法对试验数据进行分析处理,建立了剥离效果评价标准和数学模型。通过对响应面图的分析,得出了适用于水射流剥离闭壳肌的优化工作参数组合。结果表明:射流压力应控制在2~4 MPa、射流入射角度控制在23°~33°、射流喷射距离控制在30~40 mm。当射流压力为3 MPa、射流入射角为23°、喷射距离控制在30 mm时,扇贝闭壳肌剥离效果最好。该文可为扇贝剥离设备的设计及优化提供借鉴和参考。Shucking processing in scallop adductor muscle is a hotspot and also a difficulty point in the research field of seafood processing. Scallop shucking method is generally divided into mechanical and non-mechanical method. However, due to its special physiological structure, the ideal shell shucking method has not been found yet. It is a critical job for us to find advance technologies that are effective, inexpensive and safer than previously available technologies. At present, the main method of implementing the shelling processing is by hand in China. Water jet cutter technology is based on the naturally erosive effects of water. Water jet cutters work with the same principle as high pressure washers, which essentially ＂cut＂ the dirt off of the surfaces on which they are used. Water jet technology is a safe and green technology. In recent years, water jet is applied to many fields of industries and has been widely used in food and medical fields. One of the main advantages of this technology is that the technology has not thermal effect on machined material. In order to meet the safety, economy and efficiency requirements, the water jet technology is introduced into the study on shell adductor muscle shucking of argopecten irradians. In this paper, the simulation analysis and experimental study of the effect of water jet parameters on the adductor muscle shucking were conducted with the bay scallop sample with the height of 55-60 mm. The idea of shucking the adductor muscle along the tangential direction of the shell was proposed, and in the scallop shell body curve fitting, the initial incidence angle was 23°. Through the single factor experimental study, the scopes of the parameters which affect the stripping effect, including the jet pressure, the angle of incidence and the injection distance, were determined. The results showed that the scopes were as follows： The jet pressure of 2-4 MPa, the incidence angle of 23°-33° and the injection distance of 30-40 mm. The contributions of parameters to the sen

关 键 词：优化 加工 水射流 曲线拟合 闭壳肌剥离 

分 类 号：S985.36[农业科学—捕捞与储运] TS254.3[农业科学—水产科学]