驯鹿足底非规则特征形貌数学模型构建及验证  

Mathematical model establishment and validation of irregular characteristic morphology for reindeer foot bottom

作　　者：张锐[1] 乔钰[1] 吉巧丽 李建桥[1] 

机构地区：[1]吉林大学工程仿生教育部重点实验室,长春130022

出　　处：《农业工程学报》2017年第8期56-61,共6页Transactions of the Chinese Society of Agricultural Engineering

基　　金：国家自然科学基金资助项目(51275199);陆军及通用武器装备技术革新项目(2014220101001105)

摘　　要：为攻克常规防滑轮胎在冰面上通过性低的难题,以驯鹿足为仿生原型,对驯鹿足底特征形貌进行分析。该文通过逆向工程技术,将驯鹿足单个足底划分为内、外侧边缘曲线、脊线凹槽面和足跟凸冠面4个典型部位。运用1st Op软件和MATLAB软件对特征部位拟合并构建数学模型,利用X射线能谱仪对驯鹿足底特征部位进行元素分析。内、外侧边缘曲线方程的决定系数R^2分别为0.994、0.992;脊线凹槽面和足跟凸冠面曲面方程的R^2分别为0.96、0.98。通过模型验证发现,模型拟合值与实际值的相对误差均值在5%以下,实现了驯鹿足底特征形貌从生物模型到数学模型的转化。能谱分析结果表明驯鹿足底除含有大量的碳、氧及氮元素外,硫、硅、铁、铝、钙5种元素含量较高,并且不同部位的元素存在差别。该研究可为工程仿生技术应用于冰路面行驶车辆胎面设计提供新的研究方向和参考依据。In recent years,the traffic accidents occur frequently in winter and how to prevent frequent traffic accidents has become an urgent problem to be solved.Reindeer lives in frigid areas and possesses the superior walking ability on ice.Reindeer feet are the exclusive parts which contact with the ice directly.The sole characteristic morphology of foot bottom is the key factor to the excellent anti-skid performance of reindeer.The research of the reindeer feet bottom characteristics will help to apply the superior characteristics to snow tire tread and improve the trafficability property of tire on ice ground.Therefore,the mathematical models of the reindeer feet were studied.The feet were taken from 4 eighteen-year-old adult homebred reindeers,which were bought from the Ewenki nationality located in Genhe City,Inner Mongolia,China.In order to avoid impurity interference,the feet were cleared up before the experiments.The geometric point clouds of the reindeer feet were obtained by using a three-dimensional（3D）hand-held non-contact laser scanner.After that,the data were imported to Geomagic Studio software and we reconstructed the analytical model.With the cutting function of the software,the reconstructed model of reindeer foot was divided into 4 typical characteristic areas：The edge curves（inside edge and outside edge）,the ridge groove surface and spherical cap surface.In addition,these point clouds were imported to CATIA（computer aided three-dimensional interactive application）to be filtered,which reduced the calculation amount of the fitting curves and surfaces.We filtered the dense point clouds through adopting the reasonable method and the retained characteristic points that reflected the edge and sole morphology of reindeer foot with the digitized shape editor module of CATIA.Through the above processes,the 3D coordinate data points of these characteristic areas were exported.The edge curves were fitted using curve fitting software 1st Opt（First Optimization）,and then fitting the equation and

关 键 词：仿生 模型 计算机仿真 逆向工程 驯鹿足底特征 

分 类 号：TB17[生物学—生物工程]