检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:夏云峰[1,2,3] 郝思禹 徐华[1,2,3] 蔡喆伟 张世钊[1,2,3] 闫杰超
机构地区:[1]南京水利科学研究院,南京210029 [2]水文水资源与水利工程科学国家重点实验室,南京210098 [3]港口航道泥沙工程交通行业重点实验室,南京210024 [4]河海大学港口海岸与近海工程学院,南京210098
出 处:《实验流体力学》2017年第3期72-77,共6页Journal of Experiments in Fluid Mechanics
基 金:国家重大科学仪器设备开发专项项目(2013YQ040911);国家自然科学基金项目(51309158)
摘 要:新型壁面剪应力传感器的出现为河口海岸工程中水下壁面剪应力的准确测量提供了新的方式。热式壁面剪应力传感器受环境温度影响显著,相关传感器的研究与应用需要准确的标定。本文基于宽扁管道内壁面切应力与沿程压力梯度的关系,研发了一种具有温控功能的水下壁面剪应力传感器静态标定装置,可实现不同水温条件下的壁面剪应力输出。该标定装置可提供的最大水温在35℃。最后通过对MEMS柔性热膜式壁面剪应力传感器在不同水温条件下的静态标定实验,确定了不同水温条件下传感器的标定系数,结果表明标定系数B与水温呈线性相关。The appearance of new wall shear stress sensors provides new methods for measuing the underwater bed shear stress in estuarine and coastal engineering. The thermal wall shear stress sensor is affected by the ambient temperature significantly. The relevant research and ap-plication of these sensors are inseparable from the accurate calibration. Based on the relationshipbetween the wall shear stress and the pressure gradient along the duct with histatic calibration device for underwater wall shear stress sensor with temperature control is devel-oped. This device can produce wall shear stress for calibration at different water temperature. The calibration device can provide a maximum water temperature of 35C. A static calibration ex-periment of the MEMS flexible hot-film wall shear stress sensor is conducted using the device, and the calibration coefficients under different water temperature conditions are determined. The linear relation between the calibration coefficient B and the water temperature is found.
分 类 号:TV131[水利工程—水力学及河流动力学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200