基于UG与ADAMS的水平定向钻牙轮扩孔器联合运动仿真研究  

Motion simulation of horizontal directional drilling roller reamer based on UG and ADAMS

作　　者：任斌[1] 赵广慧[1] 夏征 单慕晓 魏秦文 刘璐[1] 王顺[1] 

机构地区：[1]西南石油大学机电工程学院,四川成都610500 [2]中油管道检测技术有限责任公司,河北廊坊065000 [3]中石油天然气管道科学研究院,河北廊坊065000

出　　处：《机械设计》2017年第6期30-35,共6页Journal of Machine Design

基　　金：国家自然科学基金重点资助项目(51134004);西南石油大学创新基金资助项目(CX2014SY27)

摘　　要：针对水平定向钻牙轮扩孔器在穿越工程的钻进过程中,其运动的复杂性以及扩孔过程牙齿上某一点的位移、速度、加速度以及空间轨迹难以测量的特点,提出利用UG和ADAMS对牙轮扩孔器进行联合运动仿真。通过仿真结果输出不同钻进参数情况的牙齿上某一点位移、速度、加速度及空间运动轨迹等数据,得出牙轮扩孔器扩孔过程运动规律。结果表明联合运动仿真能够较好地模拟牙轮扩孔器的运动情况,为牙轮扩孔器的几何设计优化提供参考信息,对于水平定向穿越工程有着重要的意义。It is difficult to measure the displacement,speed,acceleration and the space trajectory of a point on one horizontal directional drilling roller reamer tooth in reaming process.Meanwhile,the motion of horizontal directional drilling roller reamer is complex.On this basis,the motion simulation based on UG and ADAMS is proposed for the roller reamer.Simulation results show the data of displacement,speed,acceleration and the space trajectory of a point on one tooth correspond to different drilling parameters,the motion rule in roller reamer reaming process is concluded.The result shows that motion simulation based on UG and ADAMS can work well on the roller reamer,which provides reference information for geometric optimization design of the roller reamer,it has great importance for horizontal directional drilling engineering.

关 键 词：牙轮扩孔器 运动仿真 钻进参数 

分 类 号：TE22[石油与天然气工程—油气井工程]