C/N共掺MoS_2复合薄膜的微结构及其摩擦特性研究  

Microstructure and Tribological Properties of C/N Co-Doping MoS_2 Composite Film

作　　者：张晓琴[1,2] 于富成[1] 柴利强[2] 许佼[2] 贺腾飞[1,2] 逄显娟[3] 王鹏[2] 

机构地区：[1]兰州理工大学材料科学与工程学院,甘肃兰州730050 [2]中国科学院兰州化学物理研究所固体润滑国家重点实验室,甘肃兰州730000 [3]河南科技大学高端轴承摩擦学技术与应用国家地方联合工程实验室,河南开封475001

出　　处：《摩擦学学报》2017年第4期537-543,共7页Tribology

基　　金：国家自然科学基金项目(51227804;U1404504)资助~~

摘　　要：采用射频磁控溅射法,在氩和氮混合气氛下共溅射二硫化钼和石墨靶制备不同石墨靶溅射功率的C/N共掺MoS_2复合薄膜(MSCN).通过EDS、XPS、SEM和TEM对薄膜的成分及微观组织结构进行分析;利用纳米压痕仪,高真空摩擦试验机和UMT-2摩擦试验机分析薄膜的力学和摩擦学性能,并探讨了C/N共掺及对薄膜结构、力学和摩擦学性能的影响.结果表明:MSCN复合薄膜中的C含量随着石墨靶溅射功率的增加而增加;C/N共掺使得薄膜结构致密平整;当石墨靶溅射功率350 W时,薄膜呈现自形成纳米多层结构,该结构的出现使得薄膜最高硬度可达9.76 GPa,并且在高真空和大气环境下相比纯MoS_2薄膜表现出更低的摩擦系数以及良好的高耐磨性.In this study, the C/N co-doping MoS2 composite films（MSCN） with different sputtering power applied on graphite target were deposited by radio frequency magnetron sputtering of graphite and MoS2 targets in argon and nitrogen atmosphere. The influence of C/N co-doping on microstructure, mechanical and tribological properties of deposited films was analyzed using the various analytical techniques. The results show that increasing the sputtering power applied on graphite target led to the increase of carbon concentration in the MSCN composite films, resulting in the formation of dense structure and smooth surface. When the graphite target sputtering power reached 350 W, a selfassembled multilayer structure with periodicity in the nanometer scale formed. Benefiting from the compact and selfassembled multilayer structure, the maximum hardness of MSCN film reached up to 9.76 GPa, and corresponding friction experiment indicates that comparing to pure MoS2 film the composite films exhibited lower friction coefficient and high wear resistance both in high vacuum and ambient air conditions.

关 键 词：磁控溅射 MSCN复合薄膜 自形成多层结构 力学性能 摩擦学性能 

分 类 号：TH117.3[机械工程—机械设计及理论]