检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴秀丽[1] 余少华[2] 叶丽君 温秀杰[1] 刘鲁川[1]
机构地区:[1]第三军医大学大坪医院野战外科研究所口腔科,重庆400042 [2]第三军医大学西南医院口腔科,重庆400038 [3]襄阳市第一人民医院口腔科,湖北襄阳441000
出 处:《第三军医大学学报》2017年第16期1654-1658,共5页Journal of Third Military Medical University
基 金:国家自然科学基金面上项目(81470032)~~
摘 要:目的观察Er∶YAG激光不同频率和照射时间对牙体硬组织切割效率和表面形态的影响。方法 80个牙釉质样本和80个牙本质样本分别按照射时间10 s和20 s,使用随机数字表法分为两组(n=40),每组再分为5个亚组(n=8),分别用频率为10、15、20、25、30 Hz Er∶YAG激光对每个样本进行照射,体视显微镜测量牙釉质和牙本质凹坑直径、深度,扫描电镜观察牙釉质和牙本质表面形态。结果 Er∶YAG激光频率10~20 Hz、照射时间10 s及20 s时,牙釉质和牙本质凹坑的直径、深度随频率增加和照射时间延长而增加(P<0.05);Er∶YAG激光频率25~30 Hz、照射时间10 s及20 s时,牙釉质和牙本质凹坑的直径、深度随频率增加和照射时间延长出现缓慢增加的趋势(P>0.05)。扫描电镜下观察,牙釉质和牙本质表面形态发生了一定的变化,Er∶YAG激光频率为25~30 Hz时,牙釉质和牙本质表面出现裂纹、熔融等热损伤现象。结论 Er∶YAG激光适宜的频率和照射时间不仅可以获得牙体硬组织良好的切割效率,而且不会引起牙体硬组织表面形态热损伤。Objective To assess the efficiency of Er :YAG laser with different frequencies and irradiation time for ablation of dental hard tissues and its effect on dental surface morphology. Methods Eighty enamel samples and 80 dentin samples were randomly divided into 2 groups (n=40) with Er :YAG laser ablation for 10 s or 20 s, and each group was further divided into 5 subgroups (n=8) for ablation with Er :YAG laser at frequencies of 10, 15, 20, 25, or 30 Hz. After irradiation, the diameter and depth of enamel and dentin pits were observed under stereoscopic microscope, and the surface morphology of the enamel and dentin was observed by scanning electron microscopy (SEM). Results The diameter and depth of enamel and dentin pits following Er :YAG laser ablation were increased significantly as the laser frequency increased within the range of 10-20 Hz and the ablation time extended (P 〈 0.05). The diameter and depth of the pits were increased only slightly as the laser frequency increased to 25 and 30 Hz and the ablation time increased to 20 s (P〉0.05). SEM showed alterations on the surface morphology of enamel and dentin after the ablation, and damages such as crack and melting occurred on the enamel and dentin surface after laser ablation at frequencies of 25 and 30 Hz. Conclusion Er :YAG laser with an appropriate frequency and ablation time is efficient for dental hard tissue ablation without causing thermal damage to the dental surface.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117