两种国产铸造数值模拟软件的应用  

Application of Two Kinds Domestic Casting Numerical Simulation Software

作　　者：傅骏[1,2] 肖方志[1] 翟开华[1] 王兴芳[1] 聂君[1] 

机构地区：[1]四川工程职业技术学院材料工程系,四川德阳618000 [2]四川工程职业技术学院材料成型虚拟仿真实训中心,四川德阳618000

出　　处：《铸造技术》2017年第8期2027-2029,共3页Foundry Technology

基　　金：四川工程职业技术学院科研重点项目:通用有限元软件铸造CAE的关键技术研究(YJ2015KY-02);四川省发改委:四川省航空材料检测与模锻工艺技术工程实验室(川发技2016-548)

摘　　要：为了比较两种国产铸造数值模拟软件,在新型车辆安装座的熔模铸造生产过程中,拟订了6种工艺方案,采用直觉式平台Pidex进行三维建模、华铸InteCast与浩宇HyCast进行数值模拟。对6种方案均进行试生产。对铸件进行外观检测与X射线检测,验证铸造CAE的模拟结果。综合比较结果证明,两种国产铸造数值模拟软件都能很好满足铸造生产需要。In order to compare two kinds of domestic casting numerical simulation software, taking investment casting production process for vehicle installation sealn as an example, six kinds of investment casting processes were formulated using Pidex platform to do 3D modeling, and using InteCast or Hycast software to carry out numerical simulation. Trial productionm was carried out under six kinds of process cases. The appearance of the casting was observed to verify the simulation results of casting CAE. Comprehensive comparison results show that both of the two domestic casting numerical simulation sottwares can meet the needs of casting production.

关 键 词：智能铸造 直觉式 华铸CAE 浩宇CAE INSPECT 

分 类 号：TG249.5[机械工程—精密仪器及机械]